|
Romy the Cat's
personal site dedicated to advanced audio and evolved music reproduction
techniques
|
|
|
|
|
Those horns are in Connecticut’s 7th exit in a home of guy who has a privet river with own waterfall at his backyard. He could put 20Hz straight horn in his closet if he would know how…. :-)
Anyhow, I do not what to dive into this discussion as it w...
|
Thank you Romy,
<<The multiamping with Super Melquiades was made with intend to optimize the output transformers and to eliminate the interference between the inductance of the upper bass driver’s coil and the MF driver. I still use the speake...
|
If I succeed to make my midbass horn at attic then I will face another problem that I do not know how to address at this point. The horns will be powered from Melquiades bass channels – it means it will use a good 70 feet speaker cable. If I go with ...
|
Romy,
Have you considered replacing the cover on the tail of your Upper-Bass horn?
...With a large-diameter circular cover, made from a more resonant material (when I say large diameter, I mean quite a bit larger than the diameter of the rear c...
|
Hello friends,Romy wrote (in the context of the MingSu/Jackson/Goto upper-mid bass horn thread):"...Yep, I would hang the midbass above and as you said put an upperbass on a floor to anchor the center image. Something similar to what Jessie is doing....
|
I am not laughing. Just the other day I had the upper bass a little extra prominent, and midrange was gently tapering off into the highs. Some would say it was rolled off and flat, but when I played two Mahler 1's and the 9th, I enjoyed him like ne...
|
[quote user="MINGSU"]You can hear a full 4 way GOTO in this event next month. Come down, stop by, enjoy and judge yourself, in person.
http://www.capitalaudiofest.com/ July 8-10 in Rockville, MD.[/quote]
It looks like out friend M...
|
[quote user="Romy the Cat"]I still feel that a complementary upper bass channel is begging to be used in this system. [/quote]Yes, Romy, the upperbass channel is absolute mandatory. My comments were only about the particular driver, nothing more than...
|
Romy,thank you for sharing thoughts on the 80Hz horn, giving honest opinion. So if the 80Hz horns are flawed design, I do not want to waste time to improve them. By the way, they are loaded with EVM15B drivers. I am now a bit perplexed on which rout...
|
[quote user="Murataltuev"] anthony wrote:EDIT: Not sure we are on the same page regarding frequency range for this hornWell, I don't have any other options.My 42Hz upper bass horn has flat frequency response in 70-300Hz range and -5db in 60-400Hz, s...
|
Yes, when I move the drivers or for that matter if I move my listening position, I realign.What I hear and measure about the drivers relative distances to each other is this. When I first set up the drivers, one horn ended and the next one started, t...
|
Why the need to cross the S3 so low? Crossing below 500Hz on a 260 horn seems to be pushing the limits a bit. What kind of upper bass solution are you planning?
Regards,
Anders...
|
Hi Jorge, Thank you for the response. Re: cable, yes I've been too lazy to install binding posts in the back of the cabinet. I have no good reason, necessarily why I am crossing the 250 Hz horn at 1k. I posted my measurement above, but of course this...
|
[quote
user="anthony"] I have noticed that there are several commercial horn
offerings that push a wide bandwidth through a single horn (eg. Martion Einhorn
370Hz - 20kHz, BD Designs Orphean MKIII 270Hz - 22kHz) and I just wonder how
they do it i...
|
[quote user="anthony"]EDIT: Not sure we are on the same page regarding frequency range for this horn[/quote]Well, I don't have any other options.My 42Hz upper bass horn has flat frequency response in 70-300Hz range and -5db in 60-400Hz, so I need ne...
|
I'm not sure I understand what point you consider a priority, but I can explain the reason for my initial inquiry and what I intend to do.My initial inquiry was intended to acquire information on whether a horn with a target range of 40Hz to 400Hz co...
|
Unfortunately its $1000,- total... Its not fixed, i can still do alot with that though.Alnico is better but only available in vintage drivers right? How does neodymium compare?The Jbl's seem to fall off fairly quickly. I dont need flat to 20K b...
|
Here are a few answers1. a, 84 Hz b, 4.8 inches square c, Hyperbolic exponential, T 0.8 1/2 Pi d, none so far on upper bass horn. S2 and 2405 have series capacitors feeding them. e, Eminence Kappa 12. 4. Both tweeter and S2 ca...
|
Well, I do have 3 channels of DSEP. Dedicated Single Ended Pentode: one channel (bass/mid 30-500 Hz) with a 307A DH pentode feeding two wonderful Fane neodymium Colossus 12" - one from FS to 150 Hz and the second from FS to 500 Hz. OPT with a lot of ...
|
Bruce Edgar room was probably the only rooms at the entire show where form my prospective it was possible to begin to talk about "pure audio", so I will.
Bruce picked and smartly holds at "The Show" a wondefull room, the small room, but fr...
|
[quote user="Romy the Cat"]I am not familiar with those types of drivers and with the results they are able to show. [/quote]
Normal
0
21
false
false
false
MicrosoftInternetExplorer4
...
|
I think we have to subdivide bass into upper bass from 100hz to whatever your midrange does and bass under 100hz and then maybe infrabass.
Front loaded upper bass horns are fantastic and I would say if you never heard one, you really nev...
|
Tax, do not go over yourself with “building paranoia”, looking for drivers, horns, boxes and etc. If you are looking for 80Hz to 200Hz range (you will need higher upper knee for AG Dou) then you do not need a bass driver with Resonance frequency of 3...
|
I am currently planning high-WAF speakers for my sister which have to stand in the corners on the floor. Asking for small corner horns I was told the EV Baronet could be a solution. Simulating it with roughly estimated dimensions I found that the FR ...
|
Thanks, Romy, for your generous reply.
I won't try to address everything about everything, but let me bore
you with a mini-history of what is going on with my playback so you
will understand where I'm coming from and where I'm trying to ...
|
My system can be viewed here https://www.youtube.com/watch?v=GiIzpv_R-W8My front end TT and R2R. You can see the upper bass horn built using Fane Studio 8M on the other side of the Duo.Tribute OPT and Nichicon PS capsPS Board insituPower supply board...
|
What I like: The fact that they are doing this. The upper part of these speakers is truly beautiful, both in composition and in workmanship, which is on the level of fine jewelry. Sonic attributes aside, visually that Pinocchio tweeter horn i...
|
Mouth size is the one dimension I've struggled with most.As of the present time, I've deduced to use a mouth size that may prevent me from achieving the target frequency of 40Hz, and instead produce a frequency of about 55Hz or even 60Hz. I can...
|
Ronnie,
The stuffing the back chamber in upper bass horn and stuffing a sealed enclosure have totally different purposes. In the firs case we need to decrease volume of the chamber in the second to increase it. The polyurethane foam spray is not foa...
|
Again, moving the speakers last night I felt that I really would like to move the speakers closer to the mid of the room – the further the speakers from the back wall the more interesting sound. There is another “again” in what I felt last night. I t...
|
|
|
|
All context of this site except the Forum's posts
Copyright © Roman Bessnow 2004-2024
All messages within the Site’s Forum Copyright © by
authors of the posts
|
Last 24-hours posts: |
0 |
|
|
|
Total human visitors: |
43,006,483 |
|
|
|
|
|
|